Posted on Leave a comment

Three Modes of Frequency Application on Healy Resonance Medical Device

The core unit of Healy is a quantum sensor that uses these golden frequencies to individually analyze the frequency that is right for you in the application. Three modes of Healy frequency Application are “Realtime”, “Resonance” and “Indications”. In Realtime mode, the currently suitable frequency is determined and applied in real time. In Resonance mode, the current resonance frequencies are determined and applied in real time until they are “no longer needed“ by the body. In Indications mode, specific frequencies are analyzed and applied in real time from a frequency pool specifically compiled for a field of application until they are “no longer needed“ by the body.

1. “Real time” Mode
According to our model, each frequency has a different effect and the condition of the user during application changes after a short time. In our experience, it is therefore important to analyze the frequencies that the user needs during the therapy. Healy can determine individual frequencies in real time and thus adapts the application to changing needs.
In Realtime mode, the following frequency bands are used to determine the frequencies:
•• 0.1 Hz – 1 kHz
•• 15 kHz – 1 MHz

2. “Resonance” Mode
With the Resonance Analysis function, Healy analyzes how long a frequency should be applied and
checks the progress of the currently applied frequency every 10 seconds. As in Realtime mode, these frequencies are individually determined during application. The respective frequencies are applied until the progress, which can be between -100 % and +100 %, reaches 95 % or the maximum time for the resonance application has passed. The current progress value is displayed on the Healy application screen.
In Resonance mode, the following frequency bands are used to determine the frequencies:
•• 0.1 Hz – 1 kHz
•• 15 kHz – 1 MHz

3. “Indication“ Mode
Specific frequencies for certain areas of life are stored in the indication blocks. For example, certain frequencies used to bioenergetically support the kidneys can be stored in a special indication block. Frequencies are then determined from this specified frequency pool during the application and, as in resonance applications with progress analysis, applied until the progress has reached 95% or the maximum time for the indication application has expired. A frequency program within a Healy can contain up to 400 different frequencies.

Leave a Reply