Posted on Leave a comment

Differences between Contact Mode and Remote Mode for Healy and Spooky2 Devices

For frequency healing using healy or spooky2 device, contact mode and remote mode are the most commonly be used. Obviously, contact mode needs to be used a wire as transmission, while remote mode uses wireless method to transmit. As contact mode is directly contact to body, it can transfer higher power and more deepbody penetration; however, because of high power, we suggest a maximum of two contact sessions per day for Spooky2 device and maximum three sessions per day for Healy device. However, once or twice a day is usually sufficient, followed up with Remote Mode for the rest of the day is well. Again, multiple repeats in a day do not translate into better efficacy, and can be overdone, especially, wrong application of settings can result in skin burns. For instance, you can use first contact mode in the morning, and can certainly add a second contact treatment in the early evening, and then use remote mode overnight for Spooky2 or a few minutes for Healy.

For Remote mode, you may run your Spooky Remote v1.1 BN continuously. The Spooky Remote v1.1 MN is not recommended for prolonged use. While remote tends to be 24/7, the basic rules of implementation are as follows: Keep your program to 4 hours or less for a single pass. Run this repeating 4 hour or less loop 24/7 for at least 120 loops. Typically one may just decide a week is good if the program at 120 loops takes a shorter amount of time. Remote mode is lowest efficacy, but can be done 24/7. The others require dedicated sit time. Distance is not a factor. We can combine multiple programs at once using more than both contact and remote together.  For using a day, contact mode will have a faster efficacy than remote, while using over a week, remote may outperform contact.

Summary:

Remote Mode looks extremely attractive for those who lead busy lives. However, there are considerable benefits to be had from mixing your modes, and our recommendation is to do Contact session on the main problem every day, then switch to Remote Mode. That way, you get the best of both worlds.

Leave a Reply