If you have a sore throat, swollen lymph nodes and tonsils, and feel unwell, you can have a BFB scan. In addition to scanning the entire body, your alternative is to use the SAMPLE Digitizer to scan the sample for pathogens, not the entire body. Use the Sample Digitizer’s Biofeedback option to “Hunt and Kill”, put your sputum sample in the clip, run Hunt and Kill, then wait for it to run, the sample digitizer will analyze your sample and return that sample frequency of pathogens contained in it, it is very effective in treating sore throats. You just scan the sample and it returns the sample frequency results and runs in a continuous loop, it repeats this process every 30 minutes until no more pathogens are found, until the sample dries up, which takes about 4 hours; after 4 hours , replace with a new sputum sample, you may be able to swallow without pain within 6 hours, after which it can continue to run, or replace with a new sputum sample until the feeling is almost completely normal and the disorder is gone, This may take two or three days to recover.
Note:
- Do not wash the clips with water, keep clean with alcohol only. Proper cleaning with alcohol should last 5-10 uses.
- It’s best to rotate two or three clips each day, allowing each clip to dry completely for a day before using it.
- Each clip should be dedicated to one target, i.e. one clip per person, and if possible, only one type of sample, i.e. only blood or only saliva, etc.
Welcome to watch the following youtube video for the operation of Spooky2 Sample Digitizer ->
