Colloidal silver, usually in liquid form and used in medicine for a long time, attaches to proteins on bacterial cell walls and disrupts their membranes; silver ions can penetrate into cells, where they interfere with bacterial metabolism process, and damage their DNA, eventually the bacteria will die. The following steps are to make nanoparticulate colloidal silver with Spooky2, the silver particle size will be very small to increase the effectiveness of the colloidal silver.
Step 1: Prepare those devices
- Spooky2 XM Generator or Spooky2 GeneratorX x1 (includes power adapter, USB cable and BNC/Alligator cable)
- Spooky2 Boost v3.0 x1
- Silver Rod x2
- Magnetic stirrer x1
- glass or ceramic container
- distilled water
Step 2: Washing
Thoroughly clean the Spooky Silver Rod and Container, rinse with distilled water and dry with a napkin.
Step 3: Hardware Connection
- Fill the container with distilled water (do not use tap or filtered water, these will almost certainly contain unwanted impurities and chemicals; it is normal for your silver rod to turn grey, however, if your water has impurities, it will turn black; Hot water will speed up the process, but the particle size will increase.).
- Place two clean, shiny silver rods in the water, making sure the rods are at least an inch or more apart.
- Place the container on the magnetic stirrer and insert the small plastic stirrer.
- Clip the alligator clip to the silver rod and plug the other end of the cable into the Spooky2 Boost’s colloidal silver port.
- Cover the container with a lid, such as plastic wrap, to keep dust or dirt out.
- Connect the generator to the computer’s USB port and plug in the power adapter.
Step 4: Software Setup
- Open the Spooky2 XM (GX) generator and launch the Spooky2 software on your PC.
- Click Utilities in the top menu. Select Colloidal/Ionic Silver Calculator and a new window will pop up.
- Enter parameters to calculate when you should run the colloidal silver generation program.
- Use the “By Calculation” method to calculate the duration of the program, you can change any field in the calculator, enter the volume of distilled water, for example 500 ml; enter PPM, which is the desired parts per million, we recommend this Set to 20PPM, which is the strength of most commercial colloidal silver; enter the current, if you don’t have the tools to measure the current or don’t know how to measure it, just enter 0.2mA. This is a rough average estimate, assuming you have two 9 AWG rods one inch apart immersed in distilled water to a depth of 12 inches, the total time required to make colloidal silver will automatically be displayed next to the duration in minutes , hours, and days are given in units.
- Exit the calculator and go to the Presets tab.
- Open the Miscellaneous catalog and select Preset Colloidal Silver Generation – JW Preset.
- Go to the Programs tab and enter the calculated duration (750 minutes) you received from step 3 into the Dwell Multiplier field.
- Go to the Control tab, tick “Override generators”, select a generator and run the program.
- Turn on the magnetic stirrer. Adjust the gentle movement of the water, speed is not the key, don’t rush the manufacturing process, the slower the better.
Result: When the colloidal silver solution is ready, it may be pale yellow/gold, which indicates that the particle size is very small, and you can shine a laser in the solution and observe a visible red line indicating tiny silver particles in suspension. Store colloidal silver solutions in dark glass containers, plastic and UV rays from the sun can cause silver ions to lose their positive charge and clump together, impairing their healing abilities.
