Posted on Leave a comment

Using Big Magic Mat (PEMF) to Heal Osteoporosis

What is osteoporosis?

Osteoporosis is a systemic disease that involves the entire skeletal system of our body. It is characterized by low bone mass and degeneration of the microstructure of bone tissue. Therefore,osteoporosis increases the risk of bone fragility and fractures. According to the latest statistics, thousands of people suffer fractures from this disease every year. The most typical fractures caused by osteoporosis are femur, vertebrae and wrist fractures. In patients with osteoporosis, even minor falls or daily activities (such as twisting and bending) can cause fractures.

Osteoporosis mainly occurs in the elderly, especially elderly women. In women, the main cause of osteoporosis is estrogen deficiency, most often associated with menopause and decreased ovarian function. In men, androgens play an important role in causing bone loss and osteoporosis. In addition, osteoporosis may be caused by malignant tumors, metabolic abnormalities, gastrointestinal diseases, exposure to certain drugs, smoking, and excessive alcohol consumption.

Taking into account the increasing number of elderly people in the world, the severity of osteoporosis and the difficulty of treatment have become a major problem in the public health situation. Patients with osteoporosis often suffer from pain, disability, loss of independence and shortened lifespan. A multi-component exercise program based on strength, aerobic and/or weight training is beneficial to the treatment and prevention of osteoporosis. Unfortunately, due to common complications associated with aging, such as muscle weakness, advanced osteoarthritis, neurological diseases, and balance disorders, some patients have limited exercise capabilities. These patients believe that their only option is to take anti-osteoporosis drugs, which often have several obvious side effects. Today, pulsed electromagnetic field therapy, also known as PEMF therapy, has been shown to have a positive effect in the treatment of osteoporosis.

How does PEMF therapy treat osteoporosis?

Guided PEMF in Solana Beach, CA | Action Performance Care

PEMF therapy is a natural non-invasive method that can help treat osteoporosis. It can stimulate the regeneration of bone tissue and slow down the decline of bone density. On the other hand, PEMF therapy can promote metabolism and slow the loss of bone minerals.

The improvement of pulsed electromagnetic field therapy on osteoporosis can be explained by a variety of mechanisms. Two main types of cells can affect bone density. Osteoclasts can absorb or take away old and worn bones, and osteoblasts can build new ones. skeleton. PEMF therapy stimulates bone formation by simultaneously increasing osteoblast activity and reducing osteoclast formation, thereby turning the metabolic process to bone osteogenesis. PEMF therapy can also enhance the conversion of fibrocartilage to bone cells and increase ion calcium channels. In addition, PEMF therapy increases the blood supply to the application site, which is believed to improve bone healing. In addition, PEMF therapy has an inhibitory effect on the resorption phase of wound healing that leads to early callus formation. PEMF therapy can save many elderly people from undergoing surgery. Therefore, some people recommend PEMF therapy as the first-line treatment for osteoporosis.

In Italy, researchers removed the ovaries of rodents and studied the effects of pulsed electromagnetic field therapy on postmenopausal osteoporosis. These rodents were exposed to pulsed electromagnetic fields for 1 hour every day for 4 months. As a result, the researchers found that PEMF therapy effectively slowed the rodent’s bone loss.

Researchers also studied the effects of PEMF therapy on osteoporosis around the knee joints of patients with chronic spinal cord injury. Spinal cord injury itself may accelerate the deterioration of the disease. The researchers used the bone mineral density (BMD) before treatment as the baseline, and compared the BMD before treatment with 3 months, 6 months, and 12 months after treatment. At 3 months of treatment, the BMD of the stimulated knee joint increased 5%, the BMD of the untreated knee joint decreased by 6%; 6 months after the end of the treatment, the BMD of the stimulated knee joint and the untreated knee joint returned to close to the baseline value; 12 months after the end of the treatment, the bone quality of both knees The wastage rate was similar, with the stimulated knee joint being 2% lower than the baseline and the untreated knee joint being 3.6% lower than the baseline. This shows that pulsed electromagnetic field therapy can improve osteoporosis, and the treatment of this disease is a long-term process. In addition, PEMF treatment should not only target a single bone location, but the entire body to obtain the best therapeutic effect.

Why choose Big Magic Mat to improve osteoporosis?

A large number of studies have shown that PEMF therapy can effectively prevent and treat osteoporosis. Osteoporosis involves the entire bone, and the risk of fractures in any part of the body will increase. Therefore, long-term systemic treatment is recommended. Big Magic with PEMF Mat is the best choice for osteoporosis treatment.

Big Magic is safe to use and has no hidden dangers for long-term treatment. It replicates the natural frequency of the earth, called Schumann resonance. This magical frequency perfectly matches the frequency of our body, thoughts, tissues and cells. It can use the power of nature to balance the body and improve osteoporosis. Most existing PEMF devices only apply a single pulse in the same direction. After a long-term treatment, the cells and the body are charged in one direction and will not be neutralized, which is not good for health. Big Magic is very special. It changes direction every ten minutes, so your body will remain balanced and will not be magnetized. The Big Magic Mat is flexible and practical, and it is long enough for whole body treatment. In addition, the material of the mat is PVC, which is safe, comfortable and durable. You can put it under the bed sheet during overnight treatment. All in all, we recommend combining Big Magic with adequate nutrition, supplements, exercise, and proper hormone balance or replacement. These treatment combinations have been shown to have a positive effect on osteoporosis.

Order now -> https://www.miramate.com/?ref=56

Posted on Leave a comment

Explanation of Spooky2 Software Icon

When you open the Spooky2 software, you need to select the correct generator in the “Control” tab. When running the program, you may notice the different colors of the generator icon. What do the colors mean? The following figure shows the colors and their corresponding meanings.

Shadowing Another Master Generator

Shading means that this generator follows the leading position of another generator in the emission frequency. If you want to double the frequency of another generator, you can use the shadow to send two harmonic-related frequencies at the same time, or when you need to send When using different waveforms at the same frequency but at the same time, the shadow will produce different harmonic propagation. Shading also allows other complex transformations of the dominant frequency on the generator. For example, the main generator sends the main frequency remotely, and then the second shadow generator converts the frequency into harmonics on the PEMF coil.

Wobble

When you try to kill pathogens frequently, they may activate their defense mechanisms and become difficult to kill. In this case, their resonant frequency may change slightly, and they can avoid the specified fixed frequency. Therefore, you need a frequency range to eliminate them. Frequency swing can extend the frequency to the frequency range where these cunning pathogens can be eradicated. Amplitude swing will change the resonance intensity, causing more trouble to the pathogen, making it unable to adapt to the frequency. Both forms of swing are designed to deal with pathogens that are difficult to kill. You can activate the swing on the “Settings” tab. Enabling swing in the final stage of treatment can help remove stubborn pathogens. For example, four days after flu frequently occurs, you feel better, and then you can enable swing to kill the remaining viruses. Generally speaking, you only need to select one wobble at a time. We do not recommend using wobble with Plasma.

Stop Loop

Spooky2 runs in a loop, in other words, when all frequencies are completed, the program will return to the first frequency. If you only want to run a loop, you can press the small button to the right of the “Stop” button on the “Control” tab. Activate the stop loop.

Virtual Generator

The button is labeled “VG” instead of a number like other generators. It is a “fake” generator because it is not connected to the Spooky2 generator and therefore cannot transmit frequency. It is used as an experimental tool, you can try to run the program or shadow to understand the controls. You can now try to use VG to view various icon colors.

Posted on Leave a comment

How to Check the Normal Working of Spooky2 Hardware

When you use Spooky2, you can use the following methods to ensure that your Spooky2 is working properly.

Generator-XM & -GX

The screen will light up when working with XM or GX. If you want to ensure that the generator sends out the frequency, we recommend using the remote control to run a signal test. If the LED on the remote control flashes normally, the signal source is working. You can search for “Signal Test” in the “Presets” tab to find a test preset (see screenshot below).

Remote control

When using remote controllers with different frequencies, you may notice differences in their LEDs. The LED may flicker, stay on, look dim, or even don’t look bright. All of these can indicate that the function is normal, because the frequency, waveform and amplitude together control the way the LED responds to the signal. Low amplitude will dim or turn off the light, and when the frequency is high, the LED flashes too fast for your eyes to catch and it seems to stay on.

Boost

Connect your remote control to Boost. If the remote control works normally, then your Boost should be fine. The light will go out only when you connect PEMF to Boost.

Contact

Whether you can feel any sensations in the contact mode depends on the program. When the program is at high frequency or low voltage, you may not feel anything. If you are not sure whether your contact mode is valid, you can run a signal test. Most people will feel the current.

Plasma

If you want to check if your plasma is working, you just need to connect it correctly, load a program, and see if the inside of the plasma tube lights up and flickers. As long as the lamp is turned on and blinking, it is working.

Posted on Leave a comment

Spooky2 Healing Frequency for Deep Vein Formation (DVT)

Deep vein thrombosis (DVT) is a serious disease that occurs when a blood clot forms in the deep veins. DVT can be dangerous and usually occurs in the lower legs, thighs or arms. The main cause of DVT is damage to the veins caused by surgery or inflammation. In other words, DVT can happen to anyone. In some cases, it can cause serious illness, disability or even death. Drugs are used to prevent and relieve DVT, such as anticoagulant drugs. Sometimes, it is also recommended to use compression stockings to relieve pain and swelling. If your symptoms become complicated, your doctor may recommend surgery to remove the clot.

The following YouTube frequency video will help relieve swelling and leg pain. We recommend listening at least 2-3 times a day to keep the volume at a comfortable level to prevent any hearing damage and make sure you have enough lemonade or purified water to flush out the toxins in your body.

Posted on Leave a comment

Boost your immune system using Spooky2

The Immune System is an essential network in the body to protect people against germs and microorganisms every day. It consists of special cells, proteins, tissues, and organs that work together to protect the body. A strong and healthy immune system can defeat invading pathogens and bacteria. On the other hand, problems with the immune system can lead to various diseases. If you consider boosting your body’s immune system to help your body in the fight, you can try the Spooky2 Preset for Immune System Stimulation.

Immune System Stimulation remote preset was created by Spooky2 user Jeff Kaczor, and it uses a custom waveform created by Spooky2 user Manuel Mallo. The harmonic waveforms (square, sine, sawtooth, in sawtooth) all take and produce the fundamental frequency (F) and the next 7 octave harmonics: F1, F2, F4, F8, F16, F32, F64, and F128. You can generate an 8 note chord instead of a single frequency – each note is a harmonic of the fundamental frequency by using this waveform.

We suggest running it for 4 weeks at a time along with detox programs. Please don’t stimulate your immune system if you have autoimmunity issues! The Immune System Stimulation preset has been designed to loop continuously until stopped. Please connect your Spooky2 Remote to the “BN” port of the Spooky2 Boost.