We have better take care of our body in order not to burden our lover, family and society due to illness.
Sincerely Recommend Spooky2/MiraMate/Lifewave Frequency Health Care devices, we also has professional nurse to provide health care and nutrition advice (Inquiry Click Here).
The golden ratio preset program in Spooky2 software, its essential function is to obtain the frequency of the program, instead of transmitting a frequency on output 1 and output 2, it will create two frequencies, and the fundamental frequency remains on output 1. But the frequency generated on output 2 is the golden ratio of the fundamental frequency. Increase your chances of effective reduction. The increase rate will combine these two frequencies, and they can be eliminated or used at the same time.
Frequency fatigue means that your body has been subjected to too much frequency treatment for too long. It becomes the noise of your body. Frequency fatigue will not give you any obvious symptoms, except that it has no effect, causing any recent effective recurrence of pain or disease. Herex Reaction is when your body is overwhelmed by the toxins trapped in the cells, and it is not released immediately, you may feel nausea, dizziness and discomfort., etc
Suffering from frequency fatigue and Herxheimer’s reaction (Herx Reaction), you should turn off the frequency machine first, frequency fatigue will be eliminated relatively quickly (maybe several hours), and Herxheimer’s reaction (Herx Reaction) may It should be closed for more than a day or longer, which proves that the frequency therapy is responsive to your body, which may be a good thing. After returning to normal, you can consider continuing to use the frequency therapy.
Cataracts form when the lens in the eye is naturally cloudy, and this happens when the protein in the lens gathers together instead of maintaining a uniform distribution. The lens is a transparent layer that focuses light and images on the retina. If the lens is cloudy, it will be difficult for you to see things clearly. In severe cases, cataracts can also interfere with your daily activities, such as driving, reading, recognizing faces, and even blindness if not treated properly.
Due to the natural dysfunction of the aging lens, the elderly have a high chance of developing cataracts, which means that as we age, we are at a higher risk of developing cataracts. According to US statistics, 68% of people aged 80 and over suffer from cataracts. When the cataract is mild, you may not have any symptoms. However, they will cause your vision to change as the size increases:
Blurred vision
It’s getting harder and harder to see things at night
Sensitive to light and glare
See the “halo” around the lights
Monocular diplopia
Color looks faded
Frequent changes in glasses
How to treat cataracts?
Once you find that you have one or more of the above symptoms, it is best to find time to see an ophthalmologist, please do not ignore them, otherwise, as the symptoms become more complicated, they may seriously interfere with your life. In fact, lifestyle changes and reduced sun exposure can protect your eyes and delay cataracts, for example, eating healthy food, wearing sunglasses and a hat, and quitting smoking. If you have cataracts or want to reduce the risk of cataracts, or in the early stages, you may be able to make some small changes in your lifestyle to control your cataracts. You can follow the steps in daily life:
Use brighter lights at home or workplace
Wear anti-glare sunglasses
Use magnifying glass for reading and other activities
Surgery
Lens replacement surgery is an effective and common method to treat cataracts. If the cataract starts to cause vision loss that affects daily activities, it can be surgically removed and implanted with an artificial lens, which usually improves vision significantly.
Lens replacement surgery is currently considered the only way to get rid of cataracts. However, it cannot completely improve or restore your vision. In addition, due to the high cost of surgery and painful recovery period, it is not always the first choice for most people. Frequency therapy is an alternative therapy to assist in the treatment of cataracts. It does not have any side effects. If you plan to use natural methods to improve your vision problems at a lower cost, frequency therapy may be the right choice for you.
How to treat cataract via Spooky2
Spooky2 has the world’s largest frequency database, which includes many beneficial frequencies. You can use these frequencies to heal yourself or your family. Here, we list some programs that reduce the number of cataracts and relieve symptoms, which may bring you Effect.
When you open the Spooky2 software, you need to select the correct generator in the “Control” tab. When running the program, you may notice the different colors of the generator icon. What do the colors mean? The following figure shows the colors and their corresponding meanings.
Shadowing Another Master Generator
Shading means that this generator follows the leading position of another generator in the emission frequency. If you want to double the frequency of another generator, you can use the shadow to send two harmonic-related frequencies at the same time, or when you need to send When using different waveforms at the same frequency but at the same time, the shadow will produce different harmonic propagation. Shading also allows other complex transformations of the dominant frequency on the generator. For example, the main generator sends the main frequency remotely, and then the second shadow generator converts the frequency into harmonics on the PEMF coil.
Wobble
When you try to kill pathogens frequently, they may activate their defense mechanisms and become difficult to kill. In this case, their resonant frequency may change slightly, and they can avoid the specified fixed frequency. Therefore, you need a frequency range to eliminate them. Frequency swing can extend the frequency to the frequency range where these cunning pathogens can be eradicated. Amplitude swing will change the resonance intensity, causing more trouble to the pathogen, making it unable to adapt to the frequency. Both forms of swing are designed to deal with pathogens that are difficult to kill. You can activate the swing on the “Settings” tab. Enabling swing in the final stage of treatment can help remove stubborn pathogens. For example, four days after flu frequently occurs, you feel better, and then you can enable swing to kill the remaining viruses. Generally speaking, you only need to select one wobble at a time. We do not recommend using wobble with Plasma.
Stop Loop
Spooky2 runs in a loop, in other words, when all frequencies are completed, the program will return to the first frequency. If you only want to run a loop, you can press the small button to the right of the “Stop” button on the “Control” tab. Activate the stop loop.
Virtual Generator
The button is labeled “VG” instead of a number like other generators. It is a “fake” generator because it is not connected to the Spooky2 generator and therefore cannot transmit frequency. It is used as an experimental tool, you can try to run the program or shadow to understand the controls. You can now try to use VG to view various icon colors.
When you use Spooky2, you can use the following methods to ensure that your Spooky2 is working properly.
Generator-XM & -GX
The screen will light up when working with XM or GX. If you want to ensure that the generator sends out the frequency, we recommend using the remote control to run a signal test. If the LED on the remote control flashes normally, the signal source is working. You can search for “Signal Test” in the “Presets” tab to find a test preset (see screenshot below).
Remote control
When using remote controllers with different frequencies, you may notice differences in their LEDs. The LED may flicker, stay on, look dim, or even don’t look bright. All of these can indicate that the function is normal, because the frequency, waveform and amplitude together control the way the LED responds to the signal. Low amplitude will dim or turn off the light, and when the frequency is high, the LED flashes too fast for your eyes to catch and it seems to stay on.
Boost
Connect your remote control to Boost. If the remote control works normally, then your Boost should be fine. The light will go out only when you connect PEMF to Boost.
Contact
Whether you can feel any sensations in the contact mode depends on the program. When the program is at high frequency or low voltage, you may not feel anything. If you are not sure whether your contact mode is valid, you can run a signal test. Most people will feel the current.
Plasma
If you want to check if your plasma is working, you just need to connect it correctly, load a program, and see if the inside of the plasma tube lights up and flickers. As long as the lamp is turned on and blinking, it is working.
