Search Results for: sound

Posted on by — Leave a comment

How to Test Spooky2 Plasma Central Device

The Spooky2 Plasma Central kit has 4 functions: Plasma Mode, Ultrasonic Mode, Pulse Electromagnetic Field Mode (PEMF) and Contact mode, however, these functions may vary depending on different settings in the software Instead, here are some ways to test that your Spooky2 Central is working. Before testing Spooky2 Central, make sure all connections are good. For the connection method of Spooky2 Central accessories, please watch the video: https://youtu.be/27lEjvmrNWA. Also, don’t forget to check out the following notes for using Spooky2 Central: https://www.spooky2-mall.com/blog/notes-for-using-spooky-central/.

Plasma mode

If you connect the Spooky2 Central and run the software correctly, you can see the plasma tube and modulation light flashing, which means your Plasma is working properly. You can also test the plasma tube with a voltage test lead, the voltage sensor will light up when the Spooky2 Central is powered and the tube is running. Here is the instruction for using the test pen: https://www.spooky2-mall.com/download/PlasmaWireVoltageTest.pdf. If your Plasma Tube does not light up, you can refer to the attached link: https://www.spooky2-mall.com/blog/troubleshooting-plasma-tube-does-not-light-up/ .

Ultrasonic mode

Generally speaking, as long as you run it, you will hear the sound of ultrasonic waves. You can select the Mold and Slime 2 Day Home Treatment (P)-JW preset under the \Environmental\Plasma\ column of the Preset tab of the Spooky2 software and run it. You will hear the sound of the ultrasound, and if you are hard of hearing, ask someone else to help.

Pulse Electromagnetic Field Mode (PEMF)

The Spooky2 PEMF sends very short pulses to the coil, the pulse is a fixed 100 Hz, but the duration is very short: 69 microseconds, which means it is very difficult to detect. The PEMF coil has an on time of 69 microseconds and an off time of 999931 microseconds, it’s only on 0.0069% of the time, but you can still use a few methods to test if your Spooky2 Central’s PEMF mode is working. Before testing, please make sure all connections are tight and secure, please see detailed instructions here: https://www.spooky2-mall.com/blog/pemf-coil-how-to-connect-with-spooky-central/.

Method #1: Placing an AM radio next to the PEMF coil, which hums the radio when it is running, is the easiest way to check for a PEMF coil. For more details check here: http://www.spooky2videos.com/video/spooky2-hardware-checking-spooky-pemf-coil-using-a-radio-2/.

Method #2: Test the Spooky2 coil with a multimeter, measure the resistance of the PEMF coil, the resistance should be between 0.5 and 1.5 ohms, some multimeters give different readings, but this reflects the quality of the meter and test leads used. For more details check here: http://www.spooky2videos.com/video/spooky2-hardware-testing-spooky-coil-using-a-multimeter/.

Method #3: The operation of the PEMF coil can be checked using a sensitive compass, place the PEMF coil next to the compass and the needle will move slightly, any movement will indicate that the coil is working as the copper coil itself is non-magnetic until it is energized. For more details check here: http://www.spooky2videos.com/video/test-spooky2-pemf-coil/.

Contact Mode

If you plug in a PEMF coil and open the contact port, and you can hear a hum on the PEMF coil, the contact mode ports are working because they share some components. If you can’t hear the sound when you put the PEMF coil close to your ear, try placing the PEMF coil on a metal surface, the resonant sound of the PEMF coil should be louder. If the contact mode port fails, the PEMF coil most likely will not function either. For more details, check out the link: https://www.spooky2support.com/hc/en-us/articles/227032628-How-do-you-test-the-contact-output-on-the-Central- .

Posted on by — Leave a comment

Cavitation

Cavitation phenomenon, also known as ultrasonic cavitation, is the effect of high temperature, high pressure, discharge, luminescence and shock waves caused by the collapse of holes formed in the liquid. Cavitation formation factors may be: strong ultrasonic irradiation, shock during explosion, high-speed fluid impact friction or violent chemical reaction, etc. Cavitation can be used to promote chemical reactions, crush suspended solids in liquids, make emulsions, and kill bacteria. Ultrasonic cleaning has long been widely used.

Ultrasonic cavitation refers to the dynamic process of growth and collapse of micro-air nuclei cavitation bubbles existing in liquids that vibrate under the action of sound waves, and when the sound pressure reaches a certain value. Cavitation generally includes three stages: formation, growth and violent collapse of cavitation bubbles. When a container filled with liquid is passed through ultrasonic waves, tens of thousands of tiny bubbles, namely cavitation bubbles, will be generated due to the vibration of the liquid. These bubbles grow in the negative pressure zone formed by the longitudinal propagation of ultrasonic waves, and quickly close in the positive pressure zone, thereby being compressed and stretched under alternating positive and negative pressures. At the moment when the bubble is compressed until it collapses, a huge instantaneous pressure will be generated, generally as high as tens of megapascals to hundreds of megapascals. Suslick et al. measured that cavitation can make the temperature of the gas-phase reaction zone reach about 5200 K, the effective temperature of the liquid-phase reaction zone reach about 1900 K, the partial pressure is 5.05×10kPa, and the temperature change rate is as high as 10K/ s, accompanied by strong shock waves and micro jets with a speed of 400 km per hour. This huge instantaneous pressure can cause rapid damage to the solid surface suspended in the liquid. Ultrasonic cavitation is usually divided into two types: steady-state cavitation and instantaneous cavitation: steady-state cavitation refers to cavitation bubbles generated when the sound intensity is low (generally less than 10w/cm), and its size is within its equilibrium size Oscillates nearby, generating periods of up to several cycles. When it is expanded to make its own resonance frequency equal to the frequency of the sound wave, the maximum energy coupling between the sound field and the bubble occurs, resulting in obvious cavitation. Transient cavitation refers to cavitation bubbles with a short life cycle (mostly occurring within one sound wave cycle) generated under the action of large sound intensity (generally greater than 10w/cm ).

Posted on by — Leave a comment

How to Choose the Best Pulse Electromagnetic Field (PEMF) Equipment

Pulse Electromagnetic Field (PEMF) therapy is a fast, simple and effective way to increase the healing potential of every cell in your body, PEMF stimulates cellular metabolism and improves your health at the cellular level. PEMF therapy can benefit many disorders, diseases and injuries without any of the harmful side effects usually associated with prescription drugs and medical procedures, PEMF is a completely safe and natural form of treatment, and anyone can benefit from PEMF, not even animals exception.

With so many different PEMF devices on the market, it can seem difficult to determine which one is best for your individual needs, here are some questions to help you choose the best PEMF device.

1. What do you do with PEMF equipment? The first thing to determine before buying is the purpose of use, is it for a chronic or acute problem, for one area or multiple areas? For example, for the whole body or mainly for local problems such as knees, shoulders, and head? If you suffer from chronic diseases and general pain, the PEMF pad will be a good choice for you, which can generate PEMF around the individual body, you only need to lie down during the treatment, and it is convenient to see a doctor while sleeping. Most PEMF mats sold on the market are low-strength devices and therefore safe for long-term handling. For acute pain, topical issues, and sports injuries, portable PEMF devices are more suitable, you can put it in your bag and use it anytime, anywhere.

2. Is there a PEMF device with the best frequency for your application? Frequency is very important for PEMF therapy, the earth frequencies mainly in the 0-30 hertz (Hz) range perfectly match the frequencies of our body, mind, tissues and cells, the human body needs this frequency range to maintain health, especially 8-10 Hz scope. Most PEMF devices use rounded numbers as the basis for their programs, but scientific studies show that the 9.6 Hz frequency heals your body the most.

3. Is the PEMF device of appropriate strength? The strength of the pulsed magnetic field produced by the PEMF device is one of the most important specifications for a successful outcome, different strengths are used for different health conditions, and we must realize that greater strength is not always better. Depending on the amount of magnetic energy produced by PEMF devices, these devices can be divided into low-intensity devices typically producing less than 1,000 Gauss and high-intensity devices producing anywhere between 1,000 and 50,000 Gauss. Typically, the low-intensity device is primarily used to improve cellular health, it helps treat injuries and pain caused by accidents, sports injuries, and surgery, and it can be used for long-term treatment. While high-intensity equipment is better suited for dealing with issues deep in the body, such as the spine, abdomen, and chest, you can opt for high-intensity equipment if you have limited treatment time.

4. Does the PEMF device have multiple pulse modes? Most PEMF devices use a constant pulse pattern, which can have undesirable effects. Just as people ignore continuous sounds like traffic noise or rain, your body gets used to the frequency of the pulses and ignores them. This is called entrainment. Your body can continue to absorb if the pattern, intensity of the PEMF device changes over time, advanced PEMF devices have three main stages of change: initialization, main routine and final stage.

4.1) Initialization – Just as athletes warm up before exercise to avoid injury, PEMF therapy should start slowly, it should begin with a soothing initialization phase, with pulses alternating like a metronome, varying in strength, the magnetic field of each pulse Both are reversed, thus eliminating any residual charge, and the average intensity is gradually increased to gently prepare your body for the main procedure.

4.2) Main Program – Studies have found that short pulses enter cells more easily. Longer, stronger pulses are less effective and can cause damage. For example, driving a nail into wood, a very large hammer can damage the wood, a smaller hammer can do the same job without damaging it, but requires more blows. Optimal pulse strength varies from person to person, pulses are combined to achieve a precise pulse strength, and the pattern is then repeated in the opposite direction to ensure your body is perfectly balanced during the main routine.

4.3) Final Stage – The final stage uses soothing waves to caress your body and prepare it for the next treatment cycle.

5. Does the PEMF device have bi-directional pulses? The bi-directional pulses prevent your body from overcharging during the treatment and keep your body in balance, this also means you can safely use PEMF devices with bi-directional pulses for a long time, so make sure the pulses your device sends are bi-directional.

With these criteria in place, you now know which PEMF equipment to choose. Finally, how to choose a suitable PEMF floor mat for yourself or your family? There are five areas you should pay attention to: your budget, frequency range, bi-directional pulse, waveform and the material of the pad covering.

Posted on by — Leave a comment

Herniated Disc Pain Relief with Spooky2

A disc sits between each vertebra in the spine and acts as a cushion for the spine, and when a herniated disc occurs, one of the discs can tear or leak, limiting your ability to bend or move freely. These disc herniations or leaks are common and can appear anywhere in the spine, but in most cases, they appear in the lower back or neck. Herniated discs are one of the leading causes of neck, arm, back, and leg pain (sciatica). They do cause inconvenience and disturbing pain to our bodies.

Discs naturally degenerate as we age, so even a slight strain or twisting motion can cause a herniated disc. Overexertion or injury can also lead to a ruptured disc, along with a number of other factors, including: excess body weight, repetitive movements, sudden strain from improper lifting or twisting, chronic poor sitting and standing posture, heavy lifting, smoking .

In most cases, pain from a herniated disc will go away over time, however, it can also become chronic pain, here are some home remedies that can be used to relieve herniated disc pain:

  1. Resting for one to three days is fine, but be sure to avoid prolonged rest periods to prevent joint stiffness.
  2. Take over-the-counter pain relievers, such as ibuprofen or acetaminophen.
  3. Apply heat or ice to the affected area, however, if none of the above methods work for you, or if you feel the pain get worse over time, it is important to seek medical help right away.

Herniated Disc Pain Relief With Sooky2:

1. Contact mode: Put the Spooky2 Tens Pads on both sides of the spine, and then select the appropriate frequency to run from the Spooky2 software, you can type keywords in the “Preset/Program” tab to find these frequencies, such as “pain” and “spine” etc., select the correct Contact – Healing Shell Preset to run them.

2. Remote mode: Remote mode is an ideal transmission mode for those who travel frequently or want to help relatives far away. Here we recommend a very popular preset – Song of the Spine (R) EV (CUST) , the Song of the Spine preset is based on the 440 Hz scale, these frequencies are sourced from June Leslie Wieder Dr., who uses a tuning fork and a frequency sound generator with a 440 Hz scale to identify and tune each vertebra of the spine, this preset uses Manuel Mallos’ remote digital frequencies. Connect your Spooky2 Remote to the “BN” port of the Spooky2 Boost and load the preset into your generator run.

3. PEMF mode or cold laser mode: Spooky2 PEMF coil and cold laser device are also a good choice for treating herniated disc pain, if you have both accessories, you can use them at the same time or alternate them for maximum effect, make sure according to your Select the correct Empty Shell preset for the type of accessory being used.

Posted on by — Leave a comment

Reflexology Effectively plus Spooky2 Scalar to Relieve Stress

Stressful and unpleasant experiences are like bricks in our hearts that, if not dealt with properly, will continue to accumulate and eventually lead to serious mental illnesses including depression, anxiety, schizophrenia, and more. Fortunately, there are many therapies and self-practice activities that can be effective in reducing stress, such as music therapy, mindfulness therapy, art therapy, meditation, and etc.

If you are interested in traditional Chinese medicine and prefer a non-invasive approach to stress and anxiety, then reflexology may be for you. Reflexology is massaging your feet or hands designed to relax your entire body and help promote the body’s self-healing process, and in a way it may sound similar to acupressure or acupuncture. Reflexology has a long history in Chinese medicine, and when a reflexologist massages certain points (also called acupuncture points) on the feet and hands, it affects the organs and glands of the body. Pressing and massaging these acupuncture points stimulates the energy pathways, balancing the body’s vital energy and allowing the energy to flow freely through the body again. Therefore, it effectively restores energy balance and relieves stress and pain for you. For example, pinching the tops of your toes is thought to help treat your sinuses, while applying pressure to your heels may help with lower back and sciatic nerve pain. Numerous authoritative studies have proven that reflexology can be effective in helping reduce pain and psychological symptoms such as stress and anxiety. Reflexology can improve the following:

  • immune system
  • cold or bacterial infection
  • sinus problems
  • back pain
  • hormonal imbalance
  • Digestion
  • rthritis pain

In addition, using the Spooky2 Scalar device can amplify the effects of reflexology. In order to maintain good physical health, our body cells need to communicate and send energy unimpeded throughout the body, which is why scalar energy can help. Scalar energy can amplify the benefits of reflexology by improving cellular signaling, and the additional natural energy provided by the scalar field can also enhance your body’s ability to heal afterward. To use the Spooky2 Scalar Field, first adjust the pure scalar mode of the Spooky2 Scalar (Scalar) device, then sit or lie between the transmitter and receiver, the pure scalar energy will start to flow within the scalar field you created, you can relax and do some meditation or reflexology in the scalar field, which heals your entire body and mind at the same time.

Finally, although the risks of reflexology are low, it may interfere with blood flow, so remember to check with your doctor beforehand, especially if you are pregnant or have a medical condition such as a foot injury, gout or blood clots.